Tankclean ECO

Powerful & Concentrated Emulsifying Cleaner, Classified Heavy-Duty Degreaser for Oil, Grease, and Sludge Removal. Tankclean ECO is concentrated formulation designed to break down and emulsify heavy oils, grease, carbon deposits, removal of coaltar, crude benzene, lube oils, Petroleum distillate, pyrolyze gas oil, bitumen & similar and petroleum-based sludge. It is especially effective in demanding environments such as marine vessels, refineries, engine rooms, and industrial plants.

Properties:
Specific gravity (at 20°C) : >1
Flash point (10%)            : ± 70 °C
pH (10%)                           : 10.0
Colour                                : Green / Colourless
Odour                                 : Citrus

Application Methods For Tank Clean ECO:

• Spray

• Brush

• Soak

• Circulation or high-pressure wash systems

Common Recommended Dilution of Tank Clean ECO:

• Heavy Deposits: Use undiluted or 1:1 with water

• Light Cleaning: Dilute up to 1:10 depending on contamination level

RXSOL Tankclean Eco is designed for the removal of: heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish  and animal oils and fats, fatty acid and greases, crude palm oil, styrene, palm fatty acids.

Dosage

Directions of use
Cleaning of cargo and storage tanks by means of recirculation method.

Prewash:-
Before cleaning with Rxsol Tankclean ECO, it is necessary to prewash the tanks with hot or cold water, depending
on the type of cargo.

Recirculation method:-
Caretank ECO is added to a mixing tank containing sufficient quantity of water in order to obtain a good recirculation.
The water is heated by means of the heating coils, cargo heat exchanger or butterworth heater.The tanks are washed by means of a loading pump, after which the solution used is recycled to the mixing tank. One solution is most often used to wash 1 – 4 tanks.Tankclean ECO must be recirculated as a 0.2 – 0.5 % emulsion (dependent on the nature of the contamination). Allow this emulsion to circulate for 2 – 4 hours at the temperature of 10-60 °C (depending on type of cargo).

Direct Injection:-
Inject 0.1 to 0.2 litres of Tankclean ECO per every 100 litres of water into the washing system.Maintain cleaning temperatures between 10-60 °C (depending on type of cargo).Cleaning time 2 to 6 hours, followed by thorough rinsing with fresh hot water.

Bulletin Details

Description:HEAVY DUTY TANKCLEANER MANUFACTURED FROM NATURAL RAW MATERIALS
WHICH CONTAINS NO CHLORINATED OR AROMATIC HYDROCARBONS
• More effective than solvent cleaners.
• Non-toxic and environmentally safe.
• Safe to use because of its high flashpoint.
• Completely biodegradable.
• Replaces most conventional tankcleaners and cleaners.

Rxsol Tankclean Eco is designed for the removal of: heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish  and animal oils and fats, fatty acid and greases, crude palm oil, styrene, palm fatty acids.

Directions of use
Cleaning of cargo and storage tanks by means of recirculation method.

Prewash:-
Before cleaning with Rxsol Tankclean ECO, it is necessary to prewash the tanks with hot or cold water, depending
on the type of cargo.

Recirculation method:-
Caretank ECO is added to a mixing tank containing sufficient quantity of water in order to obtain a good recirculation.
The water is heated by means of the heating coils, cargo heat exchanger or butterworth heater.The tanks are washed by means of a loading pump, after which the solution used is recycled to the mixing tank. One solution is most often used to wash 1 – 4 tanks.Tankclean ECO must be recirculated as a 0.2 – 0.5 % emulsion (dependent on the nature of the contamination). Allow this emulsion to circulate for 2 – 4 hours at the temperature of 10-60 °C (depending on type of cargo).

Direct Injection:-
Inject 0.1 to 0.2 litres of Tankclean ECO per every 100 litres of water into the washing system.Maintain cleaning temperatures between 10-60 °C (depending on type of cargo).Cleaning time 2 to 6 hours, followed by thorough rinsing with fresh hot water.

Properties:-
Specific gravity (at 20°C) : 0.94
Flash point (10%)            : ± 70 °C
pH (10%)                           : 10.0
Colour                                : green
Odour                                 : citrus

Remarks

Key Features of Tankclean ECO:

• Strong Emulsifying Action: Breaks down stubborn hydrocarbon residues and converts them into easy-to-rinse emulsions.

• Highly Concentrated: Can be diluted for economy or used neat for tough cleaning jobs.

• Multi-Surface Application: Safe for use on steel, painted surfaces, and most industrial equipment when used as directed.

• Versatile Use: Suitable for cleaning tanks, bilges, engine parts, floors, cargo holds, machinery, and workshop surfaces.

• Water Rinsable: Leaves  residue free after rinsing with fresh  water.

Supply Locations

Tankclean ECO manufacturer supplier distributor in Mumbai, Kandla, Mundra, Surat, Hazira,  Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Tankclean ECO at a competitive price from us. We have ready stock of Tankclean ECO in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.