Gas Turbine Compressor Cleaning Fluid RXSOL 27
RXSOL 27 is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors.One operation cleans and protects the engine – and also inhibits corrosion.
Blend of non-ionic surfactants, corrosion inhibitors, organic solvents and demineralised water.
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
0.5ppm after dilution |
|
Ash |
: |
0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
10 ppm for concentrate |
Gas Turbine Compressor Cleaning.
Appearance
Clear pale straw coloured liquid with a mild pleasant odour.
Solubility
Completely soluble in water. No agitation required.
Compatibility
Not corrosive or detrimental to any of the materials normally used in gas turbine engines or aircraft components. No adverse effect on synthetic turbine oils.
Gas turbine compressor cleaning fluids are specialized cleaning agents used to remove deposits from gas turbine compressors, improving efficiency and performance. These fluids are often biodegradable, water-based, and contain corrosion inhibitors.
Dosage
By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine blade cooling holes. RXSOL 27 has a maximum ash content of 0.01%, as part of the compliance with OEM specifications for compressor washing fluid.
The unique corrosion inhibitor allows engines to be left ready for an instant restart, even in salty offshore conditions.
Remarks
Key Features of Cleaning Fluids:
Biodegradable: Many modern cleaning fluids are formulated to be environmentally friendly and biodegradable.
Water-based: They typically use water as the primary solvent.
Neutral pH: The fluids are often formulated to have a neutral pH to minimize any potential corrosion or damage to engine components.
Specific Gravity: This indicates the density of the fluid.
Ash Content: A low ash content is desirable to avoid leaving behind any residue that could cause further fouling.
Corrosion Inhibitors: These additives help protect metal surfaces from corrosion.
Compatibility: The cleaning fluid must be compatible with all the materials used in the gas turbine engine.
Supply Locations
Gas Turbine Compressor Cleaning Fluid RXSOL 27 manufacturer, exporter and supplier in Mumbai, Dubai, Muscat, Nairobi, Kolkata, Chennai, Viskahapatnam, Gandhidham, Fujairah, Sharjah, Ajman, Abudhabi, Sohar Barka Oman, Kenya Africa