DERUSTING Chemical
DERUSTING SOLUTION is a Liquid Acid, Surfactant, and Corrosion Inhibitor based product primarily designed to simultaneously clean and remove rust from steel and iron parts. This product is also effective in removing flux, heat scale and other oxides from steel, stainless steel, cast iron and aluminium in immersion and hand-wipe cleaning applications.
| Form | Liquid |
| Colour | Clear |
| Odour | Mild |
| Odor Threshold | No Information Available |
| pH Concentrate | 1 |
| Specific Gravity | 1.38 - 1.43 at 25ºC |
| Boiling Point | 101°C |
| Flash Point |
Not Applicable |
DERUSTING SOLUTION is also suitable for preparing steel and aluminium surfaces for painting in immersion (Vat) or hand-wipe applications. Use of DERUSTING SOLUTION for cleaning, rust removal or pre-paint preparation must be followed with a fresh water rinse and drying. If used prior to painting, parts should be painted after the drying step.
For parts cleaning, rust removal and surface preparation prior to painting in automotive and industrial applications.
Dosage
Equipment :
Customer Owned Machines Immersion (other common terms - Vats, Dip Tanks, Hot Tanks).
Note: Tanks (Vats) should be made of stainless steel (304, 316, or 347), ceramics or other acid proof materials. Heating elements should be made of stainless steel, impervious carbon or graphite. Do not use Monel equipment, lead or rubber lining in tanks.
Soils :
Light to moderate grease and oil. Light to heavy rust, heat scale, flux, and other oxides.
Operating Instructions:
Immersion: Use 5% to 25% volume with water at room temperature to 160ºF. Follow the cleaning step with fresh water rinsing and drying. The higher the concentration and heat, the faster the rust removal. Immersion time depends on the degree of soil and amount of rust to be removed. Hand Wipe: Use 10% to 50%/volume added to water at room temperature to 120ºF. Apply with clean rags, wipes or brushes. Allow the Rust Remover to soak on part surfaces for several minutes before wiping or brushing for improved results. Follow with fresh water rinsing then dry the parts.
*Note: Use acid resistant gloves and safety glasses when handling this product. Refer to the
product MSDS for complete safety instructions.
Remarks
Supply Locations
DERUSTING SOLUTION manufacturer and supplier in Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham, Surat, Manglore, Fujairah, Dubia, Mussafah Abu dhabi, Sharjah.