Antiscalant Antifoulant Corrosion Inhibitor 704
Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid Antiscalant / Antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems. This highly effective liquid antiscalant/antifoulant is formulated specifically to be used with RXSOL Coagulant. It is imperative that the coagulants used are compatible with the antiscalant/antifoulant being injected as incompatible chemicals may cause membrane fouling.
Form: Clear liquid
Color: Light yellow
Specific Gravity: >1
pH value: 4.5 - 5.5 ( Effective over a broad pH range 5 - 9 Compatible with feed waters that contain aluminum and iron oxides )
Solubility in water: 100% soluble
For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing. For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. Antiscalant / Antifoulant Corrosion Inhibitor 704 helps Block particles disperse to maintain the reverse osmosis membrane surface clean.
Dosage
Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:
| Temperature | Maximum Dilution % |
| 30°C | 10 |
| 30 – 35°C | 25 |
| >35°C | 50 |
Important Note: Over and under-dosing may cause membrane fouling so please contact RX Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions
Industrial Usage
Antiscalant Antifoulant Corrosion Inhibitor 704 helps to extend the membrane life and reduce the running cost.
Supply Locations
Antiscalant Antifoulant Corrosion Inhibitor 704 Exporter, Manufacturer and supplier in India, UAE, Oman, Kenya. Antiscalant Antifoulant Corrosion Inhibitor 704 available ready stock at Mumbai, Nairobi, Kenya, Chennai, Kolkata, Visakhapatnam, Gandhidham, Kandla, Fujairah, Dubai, Ajman, Abudhabi, Dubai, Sharjah UAE Middle East, Canada, Jinja Uganda, Canada