Disc Separator Cleaner
Disc Separator Powerful cleaner is specailized cleaing chemicals detergent for stainless steel separator & purifier Discs. RXSOL-16-1007-025 is an extremely effective for removal of carbonaceous deposits and SALT DEPOSITION ( Salts of Calcium Carbonate etc. ) burnt grease, carbon deposit, oily residues and lacquers found in fuel oil and lube oil purifiers filters and fuel oil separators.
Separator Cleaner is a colorless, strong acid, liquid cleaning agent with strong degreasing properties. This product can only be used on austenitic stainless steel and is corrosive on all other metals.
Specific Gravity (20°C) : 1.03 to 1.04
Flash point : None
pH (1% solution) : 2
IMO-Code : 8-2031-T700.
NATURE OF SPECIAL RISKS AND SAFETY ADVICE
In accordance with the latest E.E.C. Council directives:
R 36 : Irritating to eyes and skin.
S 2 : Keep out of reach of children.
S 28 : After contact with skin rinse immediately with plenty of water.
A very fast & effectively removes without the need of Scrubbing and Brushing of Centrifugal Separators, Disc & all types of heavy tenacious deposits which collect in fuel & lube oils centrifugal separators disc stacks.
•Chemically brighten Metal surface including aluminium by removal of heavy tenacious deposits from steel or ferrous metal parts
• Save down time by cleaning all types of separator discs without dismantling disc stacks system
• Also can be use as pickling iron and steel surfaces after a welding repair
• Leaves no film or residue after cleaning
• Improves efficiency of centrifuge installation
Other Valuable Cleaner :
RXSOL-16-1007-025 - Disc Cleaner is designed for cleaning of lube oil and fuel oil separators. Keeping the separator disc stack clean means maintaining the separation efficiency and thereby secure clean oil to the engine. Helpful product to reduce workload of personnel.
Biosol Degreaser – Biosol Degreaser is a concentrated liquid cleaning agent designed for the manual removal of oil, grease, wax or other contaminants from the exterior surfaces of machinery, floors, tank tops or other components. It may also be used to clean the interior surfaces of heat exchangers and piping systems in processes where oil, grease or wax is present.
Descalant - Descalant is a concentrated liquid cleaning agent designed for the removal of scale, magnetite, algae, humus, shellfish including mussels, lime, rust and other deposits in water systems such as pipes, heat exchangers, centrifugal pumps, and operating water systems for separators.
Metal Bright
An acidic cleaning liquid with a phosphoric acid base specifically designed for the removal of metallic oxides, rust, calcium carbonate and other inorganic scale.
Alkaline Cleaner
A strong alkaline cleaning liquid specifically designed for the neutralization of used Metal Bright prior to disposal.
Alkali Cleaner RXSOL ORG - 6
A strong alkaline cleaning liquid with a caustic soda base specifically designed for the removal of biological matter, fat, oil and other organic deposits from heat exchangers and related equipment.
Safe Acid Descalex Powder
An acidic cleaning powder with a sulphamic acid base and a corrosion inhibitor that is particularly effective for removing calcium carbonate and other inorganic scale.
RIG wash Powder
An alkaline powder that is specifically designed for the neutralization of used RIG WASH powder prior to disposal.
Dosage
For General cleaning it Should be diluted ,at the rate of 1-parts RXSOL-16-1007-025 to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend on nature of dirt / contamination . For Heavy deposition , immerse the stainless Steel DISCS in the container with concentrated RXSOL-16-1007-025 for 15 minutes to 3 Hrs. At 50 to 60°C ( Heating is not necessary ) .
After the unit or parts have been satisfactorily cleaned, remove the discs by using RUBBER GLOVES and rinse thoroughly with fresh water. It is recommended that this product is not used on soft metal, Zinc,Tin, Galvanized surfaces or Anodized Aluminium. Then separator discs can be used immediately.
NOTE:-
Recirculation and heating will improves the cleaning action.
For Heavy Duty Cleaning
Separator Cleaner can only be used for cleaning stainless steel separator discs. Fill a stainless steel or plastic container with pure Separator Cleaner. Immerse the stainless steel discs in the container and let the product act for 30 minutes up to a maximum of 2 hours. Heating the product is not necessary. Do not put the discs closely packed into the liquid but take care that there is enough space between them so that the product can work properly. Remove the discs from the bath (wear rubber gloves) and rinse with a powerful water jet. The cleaned separator discs can be used immediately.
Useful Area
#DiscCLEANER_DUBAI
#DiscCLEANER_Mumbai
#DiscCLEANER_Muscat
#DiscCLEANER_Gandhidham
#DiscCLEANER_Kolkata
#DiscCLEANER_Chennai
#DiscCLEANER_Visakhpatnam
Industrial Usage
DiscClean is specialized cleaning Detergent for cleaning of separator & purifier Discs, fuel oil and lube oil purifiers filters and fuel oil separators.
Bulletin Details
Disc Cleaner
RXSOL-16-1007-025
INTRODUCTION:-
RXSOL-16-1007-025 is a liquid blend of organic solvent with heavy duty & concentrated emulsifying agents . An extremely effective for removal of burnt grease , carbon deposit , oily residues and lacquers found in fuel oil and lube oil purifiers and filters
FIELDS:-
A very fast & effectively removes without the need of Scrubbing and Brushing of Centrifugal Separators, Disc & all types of heavy tenacious deposits which collect in fuel & lube oils centrifugal separators disc stacks.
NOTE:- Mechanical cleaning ( Scrubbing and Brushing ) damage to discs which results in poor performance.
Procedure:-
Should be diluted ,at the rate of 1-parts RXSOL-16-1007-025 to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend on nature of dirt / contamination RXSOL-16-1007-025 may be used directly.
At 50 to 60°C for best result apply higher concentration for 15 min. to 3 hours.
After the unit or parts have been satisfactorily cleaned, they should be rinsed thoroughly with fresh water. It is recommended that this product is not used on soft metal, Zinc,Tin, Galvanized surfaces or Anodized Aluminium.
NOTE:-
Recirculation and heating will improves the cleaning action.
A very fast & effectively removes without the need of Scrubbing and Brushing of Centrifugal Separators, Disc & all types of heavy tenacious deposits which collect in fuel & lube oils centrifugal separators disc stacks.
•Chemically brighten Metal surface including aluminium by removal of heavy tenacious deposits from steel or ferrous metal parts
• Save down time by cleaning all types of separator discs without dismantling disc stacks system
• Also can be use as pickling iron and steel surfaces after a welding repair
• Leaves no film or residue after cleaning
• Improves efficiency of centrifuge installation
Other Valuable Cleaner :
RXSOL-16-1007-025 - Disc Cleaner is designed for cleaning of lube oil and fuel oil separators. Keeping the separator disc stack clean means maintaining the separation efficiency and thereby secure clean oil to the engine. Helpful product to reduce workload of personnel.
Biosol Degreaser – Biosol Degreaser is a concentrated liquid cleaning agent designed for the manual removal of oil, grease, wax or other contaminants from the exterior surfaces of machinery, floors, tank tops or other components. It may also be used to clean the interior surfaces of heat exchangers and piping systems in processes where oil, grease or wax is present.
Descalant - Descalant is a concentrated liquid cleaning agent designed for the removal of scale, magnetite, algae, humus, shellfish including mussels, lime, rust and other deposits in water systems such as pipes, heat exchangers, centrifugal pumps, and operating water systems for separators.
Metal Bright
An acidic cleaning liquid with a phosphoric acid base specifically designed for the removal of metallic oxides, rust, calcium carbonate and other inorganic scale.
Alkaline Cleaner
A strong alkaline cleaning liquid specifically designed for the neutralization of used Metal Bright prior to disposal.
Alkali Cleaner RXSOL ORG - 6
A strong alkaline cleaning liquid with a caustic soda base specifically designed for the removal of biological matter, fat, oil and other organic deposits from heat exchangers and related equipment.
Safe Acid Descalex Powder
An acidic cleaning powder with a sulphamic acid base and a corrosion inhibitor that is particularly effective for removing calcium carbonate and other inorganic scale.
RIG wash Powder
An alkaline powder that is specifically designed for the neutralization of used RIG WASH powder prior to disposal.
Characteristics:-
• Formulated to remove heavy tenacious deposits.
• Allows cleaning of discs without dismantling of disc stacks.
• Reduces downtime.
• Improves efficiency of centrifuge installation.
• Cleans down to metal surfaces.
• Cleans all types of separator discs
**Read the Material Safety Data Sheet before using this product**
Remarks
Cleaning of Disc separator increasing clean oil separation efficiency to the engine which is directly increasing work out put of engine. More Detail of disc cleaner like MSDS and technical bulletines are available on through this LINK http://rxmarine.com/disc-cleaner-i-0 link .
PURIFIER DISC CLEANER is a concentrated liquid mixture especially designed to remove carbonaceous deposits from all types of lube and fuel oil separators. Its unique dual mechanism also helps to dissolve RUST from metal parts.
Keep container tightly closed to avoid contamination and always refer MSDS of Disc cleaner, before any kinds of application. MSDS of DISC Cleaner give full guideline to handle as per international rules and regulation.
Supply Locations
How to Use Disc Separator Cleaner (RXSOL-16-1007-025)
-
Prepare the Cleaning Solution:
-
Dilute the Disc Separator Cleaner with water.
-
Typical dilution ratio: 1 part cleaner to 3–5 parts water, depending on the level of contamination.
-
-
Soak the Discs:
-
Place the stainless steel discs or separator parts into a suitable soaking tank.
-
Pour the prepared solution until the parts are fully submerged.
-
-
Soaking Time:
-
Allow the parts to soak for 2 to 4 hours.
-
For heavily carbonized or greasy components, longer soaking may be needed (overnight if necessary).
-
-
Light Agitation (if possible):
-
Occasionally stir the solution or gently agitate the parts to speed up the cleaning process.
-
-
Rinsing:
-
After soaking, remove the parts and rinse thoroughly with fresh water.
-
Make sure all chemical residues are completely removed.
-
-
Drying:
-
Allow the parts to air dry or wipe them with a clean, dry cloth before reassembling.
-
-
Safety Tips:
-
Always wear gloves, goggles, and suitable protective clothing.
-
Ensure good ventilation during use.
-
Dispose of used solution according to local regulations.
-
Disc Separator Cleaner manufacturer, Exporter and supplier in Mumbai, Gandhidham Kandla Surat, Kolkata Haldia, Ennore Chennai, Vizag Visakhaptnam, Fujairah, Abudhabi, Ajman, Dubai, Sharjah UAE Middle East, Sohar, Barka Muscat Oman, Kenya Africa, Canada, Sudan Yemen