Combotreat Boilere Water Treatment Chemicals RXSOL-50-5004-025 is a dry powder containing Alkalinity builders, Phosphates and Sludge Conditioners.

Combotreat Boilere Water Treatment Chemicals RXSOL-50-5004-025 is a well-balanced blend of several powder for boiler water treatment, resulting in a scale and corrosion control by one simple operation.

Properties:-

The correct level of alkalinity ensures that optimum conditions exist for :
Precipitation of hardness salts in conjunction with phosphate.
Neutralization of acidic conditions. Avoidance of caustic corrosion.
Control of magnesium and calcium salts.
Control of hardness.
Combotreat Boilere Water Treatment Chemicals RXSOL-50-5004-025  provides a phosphate reserve to effectively react with and precipitate the hardness salts introduced with the feed water.
selected BOILER COMPOUND FOR LOW PRESSURE STEAM BOILER.

Dosage

Combotreat Boilere Water Treatment Chemicals RXSOL-50-5004-025 is best dosed by means of a bypass pot feeder directly into the boiler feed line

Funtion Mechanism:-

Alkalinity Control:-This components of  RXSOL-50-5004-025  chemically  precipitate  the hardness of salts like Calcium & Magnesium & neutralizes the acidic conditions.
Hardness Control:-RXSOL-50-5004-025 provides phosphate reserve  to effectively  react with  and precipitate the hardness salts introduces with the feed water.
Sludge Conditioner:-RXSOL-50-5004-025 component  will preventing the sludge from  adhering to metals surfaces. Boiler sludge can only be removed by blow down.
Oxygen Scavanger:-Catalyzed  of  RXSOL-50-5004-025  controls  the formation of  oxygen to protects boiler & steam line corrosion protection. As an  additional benefits it will assist to neutralize dissolved carbon dioxide. In this way  RXSOL-50-5004-025  preventing oxygen “Pitting” corrosion.

Applications, Dosage:-RXSOL-50-5004-025 is strongly alkaline. RXSOL-50-5004-025  is best applied diluted with WATER ,  any convenient  strength on a continuous  basis using a  suitable chemicals pump . The product  should be applied to the boiler feed tank or feed line to ensure adequate  mixing. The dosage rate of   RXSOL-50-5004-025  is dependent on boiler operating condition, Feed 1 Kg  of RXSOL-50-5004-025 solution for per thousand Ltr of boilers water Then control  the  system by  Periodic Alkalinity  test procedure.  If p-Alkalinity is below 200  ppm  increase the  ratio of  RXSOL-50-5004-025   solution. If  p-Alkalinity  is above  400 ppm  reduce  the  concentration of 
RXSOL-50-5004-COMB solution by dilution with water.
           
Control Procedure:-Control is by simple  boiler water tests or RX CLEANSERS  can provide a suitable test  kits for this purpose
 

Industrial Usage

Bulletin Details

BOILER WATER TREATMENT (POWDER) RXSOL-50-5004-025)
 

Product Description:-RXSOL-50-5004-025  is a well-balanced blend of several powder for boiler water treatment, resulting in a scale and corrosion control by one simple operation.

Funtion Mechanism:-

Alkalinity Control:-This components of  RXSOL-50-5004-025  chemically  precipitate  the hardness of salts like Calcium & Magnesium & neutralizes the acidic conditions.
Hardness Control:-RXSOL-50-5004-025 provides phosphate reserve  to effectively  react with  and precipitate the hardness salts introduces with the feed water.
Sludge Conditioner:-RXSOL-50-5004-025 component  will preventing the sludge from  adhering to metals surfaces. Boiler sludge can only be removed by blow down.
Oxygen Scavanger:-Catalyzed  of  RXSOL-50-5004-025  controls  the formation of  oxygen to protects boiler & steam line corrosion protection. As an  additional benefits it will assist to neutralize dissolved carbon dioxide. In this way  RXSOL-50-5004-025  preventing oxygen “Pitting” corrosion.

Applications, Dosage:-RXSOL-50-5004-025 is strongly alkaline. RXSOL-50-5004-025  is best applied diluted with WATER ,  any convenient  strength on a continuous  basis using a  suitable chemicals pump . The product  should be applied to the boiler feed tank or feed line to ensure adequate  mixing. The dosage rate of   RXSOL-50-5004-025  is dependent on boiler operating condition, Feed 1 Kg  of RXSOL-50-5004-025 solution for per thousand Ltr of boilers water Then control  the  system by  Periodic Alkalinity  test procedure.  If p-Alkalinity is below 200  ppm  increase the  ratio of  RXSOL-50-5004-025   solution. If  p-Alkalinity  is above  400 ppm  reduce  the  concentration of 
RXSOL-50-5004-COMB solution by dilution with water.
           
Control Procedure:-Control is by simple  boiler water tests or RX CLEANSERS  can provide a suitable test  kits for this purpose

Properties:-

Characteristics:-

• Convenient treatment, which provides the basic alkalinity on which successful water treatment depends.
• Provides optimum conditions for hardness control to function.
• Neutralizes acid conditions.
• Will assist in keeping silica in suspension.
• Simple test to determine level of treatment.
• Can be used in boilers of all pressures.
• Can be used as a neutralizer after acid cleaning operations
• Suitable for use with all auxiliary boilers; waste heat units; economizers, package boilers, smoke and water tube boilers.
• Dispersant action suspends sludge and sediment particles for efficient blow down.
• Oxygen scavenging for optimum protection.
• Protects boiler, steam lines, condensate lines and feed water lines from corrosion .
• Fast action due to catalyst .
• Simple test to determine level of treatment .

Packaging, Handling, First Aid & Storage:-RXSOL-50-5004-025  is generally supplied in drums containing 25 Kg/50 Kg barrel . Avoid contact with skin and eyes wear goggles & PVC gloves when handling. Keep an eye wash bottle close to the point of use. Do not take internally.On contact with Skin/Cloth, wash immediately with cupious amount of water. If eyes are affected they should be washed with water for at least 15 Minutes and medical attention sought immediately. If swallowed do not induces vomiting give plenty of water and call doctor immediately.
                                               

                                                                    **Keep drums tightly closed when not in use.**

Remarks

Supply Locations

Combotreat Boiler Chemical: The Ultimate Solution for Boiler Efficiency in the INDIA UAE OMAN

Introduction

In the dynamic industrial sectors of the INDIA UAE OMAN, where efficiency and sustainability are key, reliable boiler water treatment is no longer optional it is essential. Untreated boilers suffer from scaling, corrosion, and energy loss, leading to costly repairs and environmental non-compliance.

Enter Dubi Chem Marine International, a leading provider of advanced chemical solutions across the Middle East. Today, we dive deep into their flagship offering: Combotreat Boiler Chemical (RXSOL-50-5004-007) the ultimate solution for optimal boiler water treatment in the INDIA UAE OMAN.

About RXSOL GROUP

RXSOL MARINE CHEMICAL DIVISION is a globally recognized name based in the UAE, serving critical sectors including marine, oil and gas, power generation, and manufacturing. Specializing in eco-friendly chemical formulations, Dubi Chem has been at the forefront of industrial boiler maintenance and marine boiler protection across ports like Fujairah, Dubai, Sharjah, Khor Fakkan, Abu Dhabi, Barka, Sohara, Muscat Oman, Mumbai, Gandhidham, Chennai, Visakhapatnam, Kolkata, Paradip, Surat Gujrat

Their commitment to quality, innovation, and environmental stewardship has made them a trusted partner for industries operating in some of the world’s busiest shipping lanes and industrial hubs.

Understanding Boiler Water Treatment

Boilers, whether in a marine vessel in Mumbai, Sohar, Sharjah or a power plant in Kolkata, Muscat, Abu Dhabi, are subjected to aggressive conditions. If the feed water contains impurities like calcium, magnesium, or oxygen, it leads to:

• Scaling: Hardness salts form solid layers inside the boiler, reducing heat transfer efficiency.

• Corrosion: Oxygen and carbon dioxide attack metal surfaces, causing leaks and failures.

• Acidic Conditions: Low pH water damages internal boiler surfaces.

Unchecked, these problems lead to operational inefficiencies, costly repairs, forced shutdowns, and increased carbon emissions.

Boiler water treatment in UAE industries is, therefore, not just about maintenance it’s about operational excellence, safety, and regulatory compliance.

What is Combotreat Boiler Chemical (RXSOL-50-5004-007)?

Combotreat Boiler Chemical is a sophisticated blend of:

• Alkalinity Builders: To maintain a protective pH level and prevent acidic corrosion.

• Phosphates: To precipitate hardness salts and prevent scaling.

• Sludge Conditioners: To keep precipitates suspended, allowing easy blowdown.

This multi-function dry powder simplifies boiler water treatment into one easy operation, combining multiple protective actions into a single application.

Key Features of Combotreat Boiler Chemical

• Corrosion Inhibition: Protects boiler tubes, feed lines, and steam lines.

• Scale Control: Prevents the deposition of calcium and magnesium salts.

• Simple Dosing: Easily applied using a pot feeder or chemical pump.

• Eco-Friendly: Meets international standards for environmental safety.

• Wide Compatibility: Suitable for all types of industrial and marine boilers.

Detailed Benefits of Using Combotreat Boiler Chemical

• Extended Equipment Lifespan: Reduces corrosion and scaling, prolonging the life of critical assets.

• Enhanced Energy Efficiency: Maintains optimal heat transfer and reduces fuel consumption.

• Reduced Maintenance Costs: Fewer cleaning cycles, minimized downtime, and lower repair expenses.

• Operational Stability: Consistent boiler performance even under challenging water conditions.

• Environmental Compliance: Supports UAE’s environmental initiatives and sustainability goals.

Why Combotreat is Ideal product for Boiler Industries

In the India UAE oman, industries operate under some of the harshest environmental conditions:

• High-temperature operations

• Hard water from desalination plants

• Marine and industrial pollutants

Combotreat Boiler Chemical is specially engineered for these conditions, making it ideal for:

• Marine fleets operating through Port of Mumbai, Fujairah and Mina Zayed, Sohar

• Oil refineries in Mumbai Jamnagar, Sohar, Muscat, Sharjah and Abu Dhabi

• Power generation facilities in Chhatisgarh, Muscat, Ras Al Khaimah

• Industrial manufacturers in Surat, Sohar, Jebel Ali and Al Ain

Its resilience against high hardness and its compatibility with a wide range of boiler designs make it the best boiler chemical solution in the UAE.

Real-World Case Study: Powering Efficiency in Fujairah, Mumbai, Muscat

Case Study:
A major marine shipping company operating out of Fujairah Port faced recurring boiler issues, including scaling and energy loss, causing frequent maintenance shutdowns. After adopting Combotreat Boiler Chemical from RXSOL GROUP:

• Scaling was reduced by 85% within three months.

• Boiler downtime decreased by 30%, saving thousands of dollars.

• p-Alkalinity was consistently maintained within the ideal 200–400 ppm range.

As a result, the company reported a significant boost in operational efficiency and profitability.

Application Instructions for RXSOL-50-5004-007

How to Apply:

• Use a bypass pot feeder or continuous chemical pump directly into the boiler feed line.

• Dosage: 1 Kg of RXSOL-50-5004-007 per 1000 liters of boiler water.

• Monitoring: Maintain a p-Alkalinity range of 200–400 ppm through regular testing.

• Adjustment:

  • If p-Alkalinity is below 200 ppm: Increase dosage.

  • If p-Alkalinity is above 400 ppm: Dilute the chemical solution.

Pro Tip: Always apply the chemical into the feedwater line or feedwater tank for thorough mixing.

Safety Measures and Handling Guidelines

• Personal Protective Equipment (PPE): Goggles, PVC gloves, and protective clothing.

• Storage: Store in cool, dry conditions in 25 Kg or 50 Kg drums.

• First Aid:

  • Skin Contact: Rinse immediately with plenty of water.

  • Eye Contact: Flush with water for 15 minutes and seek medical attention.

  • Ingestion: Do not induce vomiting. Administer water and contact a doctor immediately.

• General Caution: Keep an eyewash station nearby while handling.

Comparing Combotreat to Other Boiler Chemicals

Combotreat Boiler Chemical offers several competitive advantages:

• Multi-Action Protection: Scale prevention, corrosion control, and sludge dispersion in one treatment.

• Higher Efficiency: Superior performance even under high-temperature, high-hardness feedwaters.

• Ease of Monitoring: Simple p-Alkalinity testing allows easy control.

• Better Value: One product replaces multiple treatments, lowering overall chemical costs.

Unlike traditional phosphate-only or oxygen-scavenger-only treatments, Combotreat delivers comprehensive boiler protection, making it the best boiler chemical for industrial plants and marine vessels in the India, Sohar, Middle East.

Industries Benefiting from Combotreat

• Marine Industry: Protecting ship boilers at major UAE ports like Dubai, Fujairah, Sharjah, and Abu Dhabi.

• Oil and Gas Refineries: Ensuring smooth operations in Ras Al Khaimah and Sharjah.

• Power Generation: Enhancing thermal efficiency in DEWA, FEWA, and private plants.

• Heavy Industries: Supporting manufacturing units, metalworks, and food production plants across the Emirates.

FAQs about Combotreat Boiler Chemical

1. Can Combotreat Boiler Chemical be used for auxiliary and waste heat boilers?
Yes, it is highly effective for auxiliary, waste heat, and package boilers.

2. How soon will I see results after using Combotreat?
Improvements in scale reduction and system stability can be seen within a few weeks.

3. What is the shelf life of RXSOL-50-5004-007?
If stored properly, the shelf life is at least 2 years.

4. Can I use Combotreat for acid cleaning neutralization?
Yes, it is ideal for post-acid cleaning neutralization processes.

5. Is Combotreat suitable for low-pressure boilers?
Yes, it works effectively across a full range of boiler pressures.

6. Can it help with silica suspension?
Yes, Combotreat assists in keeping silica particles suspended.

7. What testing equipment do I need to monitor treatment?
A basic p-Alkalinity test kit, available from Dubi Chem Marine International.

8. Is the chemical compatible with rubber-lined systems?
Yes, it has no known adverse effects on rubber.

9. Will it harm aluminum, magnesium, or zinc components?
Care should be taken as it is corrosive to these metals.

10. How can I place a bulk order in UAE?
Contact Dubi Chem Marine International at rxmarinegroup @ Gmail.com for wholesale inquiries.

Ordering Combotreat Boiler Chemical in the UAE

For fast deliveries across Fujairah, Dubai, Sharjah, Abu Dhabi, and other Emirates, contact Dubi Chem Marine International today!
Email: rxmarinegroup @ gmail.com

Experience high-quality boiler water treatment in UAE industries — ensuring efficiency, protection, and peace of mind.

Dubi Chem’s After-Sales Services

• Technical Consultation: Expert advice on application and dosage.

• Custom Solutions: Tailored chemical blends for specific industry needs.

• Test Kits and Training: Boiler water testing kits and staff training sessions.

• Customer Support: Responsive service to resolve queries and provide on-site assistance if needed.

Conclusion

Industrial boilers are the heart of countless operations across the India, Oman, UAE.
By choosing Combotreat Boiler Chemical from RXSOL GROUP, you invest in:

• Longer equipment life

• Greater energy efficiency

• Lower operating costs

• Environmental compliance

• Trusted after-sales support

Whether you are operating from Mumbai, Gandhidham, Sohar, Muscat, Fujairah Port, Sharjah Industrial Zone, or Abu Dhabi’s energy sector, ensure your boilers run at peak performance.
Contact Dubi Chem today and unlock a new era of operational excellence!

Combotreat manufacturer and supplier in Mumbai, Navi Mumbai, Rabale Turbhe MIDC, Gandhiddham, Surat, Mundra, Sikka, Hazira, Goa, Manglore, Kolkata, Ennore Chennai, Haldia, Visakhapatnam Vizag, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Middle East, UAE, Muscat, Barka Oman, Canada