Cement Gypsum Rust TileClean
Highly concentrated cleaner, very effective cleaning material and solvent to remove CEMENT, GYPSUM, RUST and DIRT from TILES, CERAMIC, CONCRETE, STONE, IRON and STEEL etc. When normal cleaning procedures are not enough to clean ceramic tile and grout. This product is very effective for tile and grout cleaning. This industrial strength acid cleaner will remove embedded mineral deposits and carbonaceous soils such as rust, calcium, urine stains, soap scum and efflorescence from man-made tile and cement grout. Can be used to etch hard-to-clean grout by removing a super fine layer, leaving your grout sparkling bright and clean.
Blended with latest emulsifier technology formulation with corrosion inhibitors.
pH: 1.0 pH ready to use
RXSOL-67-8685-025 Cement Gypsum Rust TileClean removes cement, gypsum, rust and dirt from floors, roofs, swimming pools, bathrooms, kitchens, fountains and falls etc.
RXSOL-67-8685-025 Cement Gypsum Rust TileClean is used for final cleaning wash to remove cement, gypsum, rust & dirt after the construction of the building and before carpeting the floors.
RXSOL-67-8685-025 Cement Gypsum Rust TileClean is used for perfect cleaning of surfaces to be painted and roofs to be coated by waterproof coatings and other materials.
RXSOL-67-8685-025 Cement Gypsum Rust TileClean is also used to wash out cement, concrete, rust & dirt from concrete mixers and other such cement mortar carrying and mixing equipments.
RXSOL-67-8685-025 Cement Gypsum Rust TileClean has an additional quality Unlike any other product it does not harm most of the painted surfaces. Dirt, rust, cement, & gypsum can be removed from painted surfaces, conditionally the base of paint is strong and stable.
Dosage
Directions for Use RXSOL-67-8685-025 Cement Gypsum Rust TileClean
-
Pre-wet the surface to be cleaned with clean water.
-
Take a plastic bucket and prepare the cleaning solution by mixing RXSOL-67-8685-025 Cement Gypsum Rust TileClean with clean water in a ratio of 1 part product (by volume) to 1–6 parts water, depending on the severity of cement, gypsum, rust, or dirt to be removed.
-
Apply the prepared solution to the surface and scrub using a medium-hard brush. Repeat the application if required to achieve better results.
-
Thoroughly rinse the cleaned surface with clean water.
Additional Note (for Iron Surfaces) RXSOL-67-8685-025 Cement Gypsum Rust TileClean
After cleaning iron surfaces, rinse thoroughly with clean water, allow the surface to dry completely, and then spray a light coat of diesel oil to provide temporary protection against rust formation.
Coverage: One Ltrs diluted solution will covers 120 sf per area.
Dilution: 50 ml - 250 ml can be dilutedwith water to make 1 Ltr solution.
The product is easy to mix (1 part water/1 part cleaner), and can be applied it to the grout with a small scrub brush. Applying it to one area at a time, then clean with wet sponge, later followed by a quick mopping. Tiles & grout will give full strength of shine and cleaning effect.
Additionals USES :::
Also can be use for cleaning of fiberglass shower, This product Effectively cleans grease, hard water/lime/stains Highly recommend to clean up fiberglass showers!
pH: 1.0 pH ready to use
Coverage: One gallon makes up to 17 gallons of ready to use solution for approximately 400 sf per diluted gallon.
Dilution: 8 - 32 oz. per 1 Gallon of Water
Remarks
- Safe and biogradable; produces no hazardous vapors
- Can be used as an etching material for masonry and marble
- Removes Embedded Mineral Deposits and Carbonaceous Soils
- Low Foaming, Low VOC Formula
- Commercial and Residential Use
Supply Locations
Tiles And Grout Cleaner ( Restoration ) manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Tiles And Grout Cleaner ( Restoration ) at a competitive price from us. We have ready stock of Tiles And Grout Cleaner ( Restoration ) in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.