Carbon Remover Cleaner HD
CARBON REMOVER is a heavy duty solvent based cleaner used undiluted for stubborn carbon deposits, residual combustion products carbon, grease, oil, varnishes and other heavy deposits from diesel engine. Extremely high solvency and penetrating capabilities to remove carbonaceous residue formed by fuel and other petroleuium based product. RXSOL-16-1003-020 is a highly concentrated Wetting Emulsifying Agent.Specifically formulated for removal of completely carbon, grease, oil, varnishes and other heavy deposits from diesel engine
This powerful action is based on a two – Layer mechanism. The top-layer prevents the evaporation of the volatile components in the button-layer. The button –layer removes the deposited substances. This way, the deposits are bind and trapped resulting to complete and safe removal.
Highly concentrate carbon cleaning product manufacturer and supplier for Marine Shipping and heavy Industries. We are one of popular supplier of Carbon Remover in Visakhapatnam - vizag, Gnagavaram, Chennai, Mumbai, GOA, Manglore, Goa, Kandla, Mundra, Sikka, Kolkata, Haldia, Pirpav, Dubai, Sharjah, Fujairah.
For removal of carbon deposits it must be used concentrated ,contained in a steel immersion bath.
SAFETY AND HANDLING:- Completely Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
Dosage
Depending upon the contamination deposition either concentrated or diluted.
Dilution : Use 1 part concentrate to 2-10 parts of water to yield a very effective end product. The components and machine parts are then dipped into the solvent / solution for 30 min. to 1 hr. Heavy deposition may need 12-24 hours , parts must be taken out from the bath and washed thoroughly with a high- pressure water supply jet system.
Conncentrated : RXSOL-16-1003-020 Carbon Remover Cleaner is most effective product in its category due to its quick and complete action. Concentrated Carbon Remover can be applied for cleaning of highly soiled components on blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder heads, injectors, tubes, oil filters , old paint and lacquers ), Finally can be rinse with water or Wipe off.
Useful Area
Engine Room Maintenance Chemicals covers full maintenance chemicals for SHIP engine and deck cleaning. We are major supplier of Decontamination Cleaners, Petrol Chemical, Tank Cleaning, Institutional Degreasers, Pressure Wash cleaner, Metalbright, Electrical cleaner, Pipe and Tank cleaning detergent chemicals, Sludge removers cleaner etc ...
Industrial Usage
Carbon Remover is most commonly used in Marine Engine Maintenance, Power Plant engineering section, Automobile Sector etc.
Very Simple to clean and maintain Oil Side of Heat Exchanger, 1st step is remove all excess oil from Heat Excahanger, Then make arrangement to re-circulate the cleaning solution through heat exchanger.
USE RXSOL Carbon Remover Cleaner in circulatory drum, which is connected for circulation. For complete dissolving of Oily carbonecious deposits from Heat Exchanger continue circulation 10-12 Hrs, Then after full cleaning operation and removal of deposits drain out the solution and use high pressure water pressure and continiue till clear water come out. Then Finally DRY out the Heat Exchanger.
Bulletin Details
CARBON REMOVER -II
Product Description:“RXSOL-16-1003-020” is a unique formulation of Wetting Emulsifying Agent alongwith powerful surfactants and organic solvents.It does not contain any chlorinated solvents of Phenols & has less than 10% Aromatics & surfactants in the product do not contain any alkyl phenol ethoxylates.
Product Uses:
1.RXSOL-16-1003-020 is a fully active cleaner specially formulated for the removal of“CARBON”& tuff oily stains residues.
2.CARBON cleaning is actived with out the need for Scrubbing or Brushing which can cause mechanical damages to discs and result in poor performance.
3.Field test have shown that RXSOL-16-1003-020 is very gentle with personnel and on metallic colour surface.RXSOL-16-1003-020 should always be used at full strength to obtain maximum benefits.
Product-Application: Directions for Use and Dose Rates
Soak Method: The apparatus/parts for cleaning are dipped through the RXSOL-16-1003-020 .Immersion time will depend up on the nature of the deposited particle.. The components should be rinsed thoroughly before handling.
Dose: Either concentrate or dilute 1 part concentrate to 2-5 part water to yield a very effective end product then components and machine parts are dipped into the solvent / solution for 30 min.to 1-hour while for heavy deposition may need 12-24 hour.
Note : Low evaporation prevents loss of chemical
Cleaning of Heat Exchangers(oil part)
1.Drain the system off any remaining oil.
2.Arrange the system for re circulation with active RXSOL-16-1003-020
3.Heat the Solń up to 50º.If heating is not available, the cleaning time will need to be extended.
4.Circulate for 12-15 hours. When the cleaning is complete drain the system.
5.Connecta high pressure fresh water supply to the upper heat exchanger connection.Rinse until water runsclear
6.Disconnect,drain and dry the system.
Note:
- Cleaning time will vary depending on the extract nature and thickness of deposit to be removal.
- Stubborn deposits should be scrubbed to assist the cleaning operation
- Your local Rx Cleansers representative will work with you to design the optimum concentrati-on&procedure
for your system.
Safety And Handling : “RXSOL-16-1003-020 ” is completely safe to handle, being non-toxic & non corrosive.As with all chemicals general safety and handling procedures apply. Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
Product Properties:-
| PRODUCT NAME RXSOL-16-1003-020 | ||
| Active Matter | 93-98% | |
| Consistency | Liquid | |
| Emulsifying Property | Good for emulsification of Oils , Gum , Wax, Greases , Polymer & Solvents , TETRA CHLOROETHYLENE ( PC ) | |
| Wetting Property | Good Wetting & Emulsifying Property | |
| Ionic Nature | Non-Ionic | |
| Colour | Pale Yellow | |
| Appearance | Clear liquid | |
| Odour | Pine based | |
| MOISTURE | 0.5 % (max) | |
| DENSITY | In g/cm3 at 15°C: 1.06 | |
| FLASH POINT | (PMCC)°C: Above 80 | |
| COMPATIBILITY | ||
| Metal | No known effect | |
| Rubber | May swell | |
| Synthetic rubber | May swell | |
| PACKAGING | Order No | Size (in litres) |
| RXSOL-16-1003-020 | 5,25 | |
Characteristics : (RXSOL-16-1003-020)
. Unique chemical formulation
. Non- toxic
. Extends time between cleans.
. Safe to handle
. Effective removal of STICKER/CARBON DEPOSITS.
. Can be applied by all normal methods.
. Formulated to be very cost effective.
. Does not contain chlorinated hydrocarbons.
. Can be used on all metals & most painted surfaces.
. Environmentally friendly.
. Non-Corrosive.
. 93-98% Active.
. Dries Completely.
. Does not require special feeding equipment for safe application.
. Reduce downtime and maintenance costs
Remarks
During maintenance Engine decarbonisation is one of important steps. Our Carbon remover fluid products not only saving engine decarbonising cost but also helps to clean all types of sludge deposits.
RXSOL carbon remover is best Solution for Internal Engine Cleaning and Maintenance also helps to clean clog oil passages, and the chemical will also effectively clean piston rings, filter, Disc etc.
The engine room is the heart of any vessel, responsible for the propulsion and essential power systems that keep the ship running smoothly. Proper engine room maintenance is critical to ensuring safety, efficiency, and regulatory compliance. At RXMARINE International, we specialize in providing high-quality marine chemicals that enhance maintenance procedures, keeping vessels in top condition.
Why Engine Room Maintenance Matters
-
Prevents Downtime & Costly Repairs: Regular inspections help detect early signs of wear and tear, reducing expensive breakdowns.
-
Enhances Fuel Efficiency: A well-maintained engine operates efficiently, cutting down fuel consumption and operational costs.
-
Ensures Crew Safety: Proper maintenance minimizes the risk of hazardous incidents such as fires, leaks, or mechanical failures.
-
Regulatory Compliance: Compliance with international maritime regulations (IMO, SOLAS) is essential to avoid fines and ensure smooth sailing.
Key Aspects of Engine Room Maintenance
1. Cleaning & Degreasing
The accumulation of oil, grease, and dirt can lead to overheating and reduced efficiency. Using RXMARINE’s Engine Room Cleaners & Degreasers, you can effectively remove sludge, carbon deposits, and oil residues.
2. Lubrication System Maintenance
-
Regular oil changes using high-quality marine lubricants help prevent friction and wear.
-
Monitoring oil viscosity and contamination is crucial to detect potential engine issues early.
3. Cooling System Efficiency
-
Scale and corrosion in heat exchangers and cooling lines reduce efficiency. Descaling chemicals like RXMARINE’s RXSCALE help prevent blockages and maintain optimal cooling.
-
Ensure coolant levels are checked regularly to prevent overheating.
4. Fuel System Treatment
-
Fuel contamination with water, sludge, and microbial growth can affect engine performance. Using fuel additives and biocides prevents clogging and improves combustion efficiency.
-
Regularly clean fuel injectors and filters to maintain smooth operation.
5. Bilge Cleaning & Oil Spill Management
-
The bilge area accumulates oil and sludge, which can pose environmental and safety hazards.
-
RXMARINE’s Oil Spill Dispersants & Bilge Cleaners effectively break down oil and prevent pollution.
6. Corrosion Prevention
-
Saltwater exposure accelerates corrosion in pipes, tanks, and metal surfaces.
-
Apply corrosion inhibitors and protective coatings to extend the life of engine room components.
Best Practices for Engine Room Maintenance
- Implement a Routine Inspection Schedule – Daily, weekly, and monthly checks help identify problems early.
- Train Crew Members – Ensure engineers and crew are well-trained in maintenance procedures.
- Use High-Quality Marine Chemicals – Investing in premium cleaning, degreasing, and protective products ensures longevity and efficiency.
- Document Maintenance Activities – Keeping detailed logs helps in audits, repairs, and regulatory compliance.
Supply Locations
Ship maintenance chemicals Carbon Remover cleaner supplier ship chandler in Mumbai - JNPT - pirpav, Kandla - Gandhidham, Chennai - Ennore, Visakhapatnam, Kolkata, Haldia, Paradip, Manglore, Goa, Fujairah, Dubai, Sharjah, Abu Dhabi, Sohar Muscat Oman, Canada