Biological Guard -280 Conc

RXSOL-40-4003-020 (Fouling Preventing Liquid ) is a very effective clear , yellowish green with , anti fungal based dispersing cleaner for the control of fouling by marine growth such as algae, shellfish, mussels, barnacles and micro-organisms and fungal growth in the sea water side of coolings systems. Due to its moleculer firm foaming properties, it also acts as a corrosion inhibitor.  
COMMON NAME : BIOLOGICAL GUARD

It should be preferably be started on a clean system since it is formulated to prevent growth rather than remove existing growth of microorganism bacteria , fungi , larvae etc.. ( EXISTING GROWTH  CAN BE CLEAN BY USING RXSOL-11-1008--DC / RXSOL-54-1008-SA  ) 

The best POINT of feeding is as early as possible in the system , preferably at the suction point of strainer , this will helps dispersion of solution in all parts of the sewater cooling system.
 

# Effectively control  MICROORGANISM GROWTH
# Economical , reduce down time cost , also doesn't require  any special monitoring
# Also control biological corrosion
 

Dosage

For sea water cooling systems

Dose 150 – 500 ML of  RXSOL-40-4003-020   for every 100 tons of sea water flowing through the system per hour. The treatment should be applied daily when the vessel is on coastal waters. Normally  the treatment is not required when sailing deep sea .

For  ballast tanks
Dose 1 litre of RXSOL-40-4003-020 per 10 tons of water prior to ballasting, followed by a monthly dose of 2 litres per 100 tons.

For Trim Tanks, Oil Rig Sea Legs and Similar Systems

Dose 25 litres of RXSOL-40-4003-020 per 100 tons of water  . GENERAL Testing for bacteria can be done with our RXSOL DIP SLIDE METHODS ( Designed to check and see anytime anywhere invisible danger Bacteria / fungus grow from Cooling / Drinking water ) which indicate the extent of the bacteriological contamination.

Bulletin Details

Fouling ( by Micro – Organism) Preventing Agent

BiologicalGuard Liq.(RXSOL-40-4003-020)

Introduction:-
RXSOL-40-4003-020  is a very effective, amine based  dispersing cleaner   for  the control of fouling by  marine growth such as  algae, shellfish ,  mussels, barnacles and micro-organisms and fungal growth  in marine sea water  cooling systems. Because of its molecular  film forming  properties, RXSOL-40-4003-020  is also acts as a corrosion inhibitor due to its film forming property .

Procedure Of Use:-
RXSOL-40-4003-020  can be used in both static and flowing systems. It should be preferably be started  on a clean system from beginning stage since it is formulated to prevent growth rather than remove existing growth .  ( Existing Growth Can Be Clean By Using RXSOL DC 1008 / RXSOL SA 1008.) Note:- RXSOL-40-4003-020 Should Only Be Diluted  With Fresh Water.

Dosage For sea water cooling systems:-

Dose 150 – 500 ML of  RXSOL-40-4003-020   for every 100 tons of sea water flowing through the system per hour. The treatment should be applied daily when the vessel is on coastal waters. Normally  the treatment is not required when sailing deep sea .

For  ballast tanks Dose 1 litre of RXSOL-40-4003-020 per 10 tons of water prior to ballasting, followed by a monthly dose of 2 litres per 100 tons.For Trim Tanks, Oil Rig Sea Legs and Similar Systems Dose 25 litres of RXSOL-40-4003-020 per 100 tons of water.GeneralTesting for bacteria can be done with our RXSOL Dip Slide Methods( Designed to check and see anytime anywhere invisible danger Bacteria / fungus grow from Cooling / Drinking water ) which indicate the extent of the bacteriological contamination.

Characteristics:-

Characteristic sulfur odour  

Remarks

Supply Locations

Bio Antifouling Guard marine growth controller for COOLING WATER TREATEMENT chemical manufacturer and supplier in Mumbai, Kandla, Gandhidham, Mundra, Surat Hazira, Chennai Ennore, Visakhapatnam Gangavara, Kakinada, Kolkata, Haldia Paradip, Ajman, Abudhabi, Dubai, Sharjah, Fujairah, UAE, Ruwi Gala Barka, Muscat Oman, Nairobi, Yemen, Sudan, Kenya, Canada