Antiscalant RO 5300
Antiscalant for the protection of RO MEMBRANE. This is a reverse osmosis membrane treatment chemicals. It is highly concentrated polymer based chemicals. Antiscalant Manufacturer, supplier and Exporter.
- Compatible with the polyamide and cellulose acetate RO membranes of the leading manufacturers.
Antiscalant RO is a liquid antiscalant designed to inhibit scale in cellulose acetate and polyamide membrane separation systems. The formulation contains a 35% by weight solution of poly acid that has a tight molecular weight range of 2000.
This product is designed for use in waters that do not have a high potential for colloidal and silt fouling of RO membrane surfaces (i.e. groundwater applications).
Antiscalant RO can be injected neat or diluted and a site‐specific dosage can be determined.
Application:
Antiscalant RO performance is achieved when the chemical is injected downstream of multimedia filters and upstream of cartridge filters. For maximum effectiveness, Antiscalant RO should be added prior to the static mixer or cartridge filter housing. For potable the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water
RO antiscalant
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost-effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost-effective RO antiscalants will inhibit a wide range of foulants including calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron.
RO Antiscalants are dosed directly to the RO feed water tank or feedwater line (after pretreatment) at the recommended dosage of 1-3 mg/L and maximum dosage at 8mg/L, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. Maximum dilution should be 10% with RO or DI water for temperature less than 30 deg C. For higher temperature the dilution ratio can increase.
A high-performance Antiscalant for RO systems formulated to prevent scale formation and fouling on membrane surfaces. It effectively controls calcium carbonate, calcium sulfate, barium, and strontium scales, even at high recovery rates. The product maintains optimal membrane performance and extends RO membrane life. Suitable for brackish water, seawater, and wastewater reclamation RO systems.
Dosage
The typical dosage range is between 2 to 5 ppm or Typical dosage range is between 2 and 6 mg/L.
Dilution:
This product is formulated to be injected neat. However, if a dilution is required, use demineralized or RO permeate water. If neither of these is available, softened water may be substituted. The dilution for Vitec 1000 should not result in a solution strength of less than 10%. This guidelin will protect the effectiveness of the internal bacteriostat which inhibits bacterial growth in the drum and feed tank.Maximum dilution is temperature related as shown below.
Temperature, °C Maximum Dilution, %
30 12
30-35 25
>35 50
Useful Area
Key Features and Benefits of ANTISCALANT RO Reverse Osmosis
-
Inhibit scale formation and effectively controls corrosion
-
Protects the membrane efficiently
-
Can be used neat or diluted
-
Enhance the plant operation and equipments life span
-
Tolerant to oxides of iron, aluminium etc
-
Economical
-
Compatible with almost all RO membranes
-
Easy in usage and handling
-
Excellent results as a replacement for softener filters
-
Highly effective for scale prevention from calciumcarbonate, calcium sulfate, barium sulfate, and strontium sulfate
-
Cleans the membrane surface by dispersing foulants
-
Works on wide range of pH
Industrial Usage
RXSOL-33-3302-025 is Antiscalant RO, a concentrated polymer-based chemical used for reverse osmosis (RO) membrane scale and fouling control. (Dubi Chem)
RXSOL-33-3302-025 – Antiscalant RO
It is designed to help control the precipitation and deposition of mineral salts on RO membranes, including calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, magnesium salts, calcium fluoride, iron, and silica. (RxMarine)
Key benefits:
-
Effective RO membrane scale inhibition
-
Controls carbonate and sulfate scaling
-
Helps control silica and iron fouling
-
Supports higher RO recovery
-
Helps reduce membrane-cleaning frequency
-
Low-dose application
-
Compatible with major RO membrane types
-
Suitable for industrial and seawater/desalination RO applications (RxMarine)
Typical dosage: The manufacturer's information indicates approximately 1–15 ppm, depending on feed-water chemistry, including calcium hardness, iron, TDS, alkalinity, pH, and silica. (RxMarine)
Packaging: Regional packaging includes larger industrial containers; one listed specification gives 30 kg and 230 kg drums, with custom packaging potentially available. (soharchemical.com)
Product Code: RXSOL-33-3302-025
Product Name: Antiscalant RO
Category: RO Water Treatment Chemical
RXSOL Antiscalant RO – Official Product Information
#ROantiscalant_India
#ROantiscalant_DubaiUAE
#ROantiscalant_Muscat
#ROantiscalant_Sudan
#ROantiscalant_Yemen
#ANTISCALANTforREVERSEOSMOSISinUAE
#ANTISCALANTforREVERSEOSMOSISinOMAN
#ANTISCALANTforREVERSEOSMOSISinINDIA
Bulletin Details
Antiscalant RO 5300Antiscalant RO 5300 is a high-performance scale inhibitor specifically designed for reverse osmosis (RO) systems. Scientifically formulated to protect and maintain RO membranes, it also serves as an effective cleaner for water softener resins and can be used as a preventative treatment to prolong system life and efficiency. Compatible with the polyamide and cellulose acetate RO membranes of the leading manufacturers.This versatile formulation is particularly effective in systems prone to scale formation and iron fouling. In both RO and water softening applications, RXSOL-33-3302 delivers reliable performance, helping to maintain optimal flow rates and water quality. Highly effective for alkaline RO permeate, or where water to be treated is alkaline. Traditionally, scale buildup and iron deposits on RO membranes have led to reduced permeate output, declining water quality, unexpected system downtime, and higher operating costs—ultimately resulting in early membrane replacement. RXSOL-33-3302 addresses these challenges with a powerful phosphonate-based chemistry that solubilizes iron contamination within sodium ion exchange resin beds. Extremely helpful for antiscaling against:
Application and DosageShould be continuously dosed into the feedwater upstream of the membrane system, typically at a rate of 3–6 mg/L, depending on the feedwater quality and specific system conditions. Our technical consultants are available to recommend the optimal dosage tailored to your system's requirements. For best results, it is advisable to operate the dosing pump at the highest possible frequency, adjusting the stroke length to fine-tune the dosing rate and ensure consistent membrane protection. An additional benefit of RXSOL-33-3302 is its compatibility with RO permeate for dilution, with fresh solutions recommended every 3-5 days to maintain efficacy. When used in ion exchange softener resin beds, the recommended dosage is 1/3 litre per 25 kg of salt added to the brine tank. |
Technical Properties
Key Features
|
Remarks
It reduces the risk of scaling and eliminates the use of hazardous acids, resulting in efficient plant operation with highest possible conversion rate.
It is a very effective antiscalant. It is also compatible with RO CHEMICALS series of coagulant and flocculants (polyelectrolytes). Our RO Antiscalant (HIGH PH) is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica.
Supply Locations
Packaging and Storage:
Standard regional pack sizes are listed below and custom packaging can be provided worldwide. This product should be protected from freezing.
| Specifications | |
| Appearance: | Yellow liquid |
| pH (10% solution): | 2.9 |
|
Specific Gravity@20oC |
1.67 - 1.2 |
Packing 30 Kgs, 230 Kgs drum.
Antiscalant RO manufacturer and supplier Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Surat, Fujairah, Dubai, Sharjah, Abudhabi, Oman, Muscat Barka, Sohar Ruwi, Sudan, Yemen, Nairobi KENYA, Gujrat Vizag Ennore, Haldia, Paradip